skip to Main Content

Manual Pulling Devices

The manual pulling devices are designed for pulling the DPT and SPT tubes out of the ground after testing. The pulling devices can both be used with ball and wedge clamps (see relevant chapters). Provided with inserts for jacking bars. Provided with durable bronze bearings.

The manual pulling devices come in 2 different sizes.

  • 20 kN single bar manual puller (incl. bar) for tubes up to 55 mm
  • 60 kN two bars manual puller (incl. bars) for tubes up to 85 mm

Replacement jacking bars for above manual puller can be ordered separately.