skip to Main Content

Soil Sampling Kit (Hammer)

Soil sampling kit

With our soil sampling kit, you always have an easy and cost-effective tool available to collect soil samples from soft to medium dense soils. Gouda Geo-Equipment is specialized in CPT equipment and has years of experience in this research domain. Our soil sampling kit is lightweight, but powerful and much more versatile than hand-operated drilling equipment.

During sampling process, the soil sampling tubes (featuring a hardened cutting shoe), are driven into the soil by means of a gasoline motor hammer. You do this in a step-by-step manner to make the insertion and withdrawal of the soil sampling tubes easier and to avoid contamination as much as possible. The soil sampling tubes penetrate through rubble and can therefore also be used at landfills, dump sites and in urban areas. The soil sampling tubes in our kit can be used both above and below the water table. The obtained soil samples are pretty much intact and allow for quick profiling.

Start testing with our convenient kit

Start testing today and order our convenient soil sampling kit to supply you with all the data you need. Gouda Geo-Equipment supplies you with everything you need for your next job, from regular CPT equipment to EXO detection equipment. Contact our team by calling (0)715 318 475 or send an email to info@gouda-geo.com to start discussing which materials would suit your job.

Our soil sampling kit is a complete and versatile soil sampling system in our range of geotechnical equipment. With this kit, you can take samples of a depth of around 5 to 10 meters in almost all types of soil during your CPT tests and it can be used during the following surveys:

  • Soil pollution
  • Particle size distribution
  • General soil classification
  • Profile descriptions
  • Archaeological research
  • Gasoline motor hammer Wacker BH23
  • Insert hammer head for Wacker BH23 hammers, M20 connection
  • Set of 12 SPT/DPT sounding tubes (32 x 1000 mm) with threaded nipple M20 x 60
  • Window sampling tube with screw-on cutting shoe, M20 connection (L = 1000 mm, OD = 36 mm)
  • Window sampling tube with screw-on cutting shoe, M20 connection (L = 1000 mm, OD = 40 mm)
  • Window sampling tube with screw-on cutting shoe, M20 connection (L = 1000 mm, OD = 50 mm)
  • Window sampling tube with screw-on cutting shoe, M20 connection (L = 1000 mm, OD = 60 mm)
  • Window sampling tube with screw-on cutting shoe, M20 connection (L = 1000 mm, OD = 80 mm)
  • Soil sampling tube – closed with liner, M20 connection (L = 1000 mm, OD = 63 mm)
  • Set of 50 transparent PVC liners for holding the soil sample
  • 60 kN two bar manual puller (incl. bars) for tubes up to 85 mm
  • Steel reinforced plywood support plate
  • Pulling bowl 100 mm with 2 handles
  • Set of hardened jaws for tubes with an outer diameter ranging from 32 to 36 mm
  • Set of 2 pipe wrenches “Gedore” (L = 580 mm)
  • Robust aluminium steps with 4 extra wide treads provided with rubber anti-slip profile
Search